WebExtraImage Phantom HSS Drill set DIN 338 TiN coated tip‚ with 3 flat surfaces‚ (handuse) 11.441 - 1-10x0‚5 mm
Tip
YouTubeId Phantom HSS Drill set DIN 338 TiN coated tip‚ with 3 flat surfaces‚ (handuse) 11.441 - 1-10x0‚5 mm
WebExtraImage
Well in stock

Phantom HSS Drill set DIN 338 TiN coated tip‚ with 3 flat surfaces‚ (handuse) 11.441 - 1-10x0‚5 mm

191381000
WebCategoryImage Phantom HSS Drill set DIN 338 TiN coated tip‚ with 3 flat surfaces‚ (handuse) 11.441 - 1-10x0‚5 mm
YouTubeId Phantom HSS Drill set DIN 338 TiN coated tip‚ with 3 flat surfaces‚ (handuse) 11.441 - 1-10x0‚5 mm
WebCategoryImage
€119.65

DIN 338, with 3 flat surfaces, short series, ground, with split point from 1.0 mm, point angle 118°, in plastic case, filled with drills from article group 11.441/11.461

To machining materialsdownload legend
Very adequate for unalloyed and low-alloyed steel ≤600 N/mm²
27-30F
Very adequate for Unalloyed and low-alloyed steel 600 - 850 N/mm²
25-28F
Very adequate for Alloyed steel 850 - 1000 N/mm²
17-22E
Adequate for Stainless steel, ≤850 N/mm²
10-14D
Adequate for Grey cast iron GG HB<260
20-33E
Adequate for Nodular and malleable cast iron HB<260
20-28E
Adequate for Aluminium and Aluminium alloys
50-80E
Adequate for Cast Aluminium Si 10 - 24%
45-70G
Adequate for Copper and copper alloys
40-65D
Adequate for Duroplastics en Thermoplastics
25-36D
2730
VC: 28 M/min,
  • choose contains diameters (ø mm) 1-10 mm x 0‚5 mm
  • 98.5% available from stock
  • Real time stock level check
  • Ordered before 19:00 on working days, shipped today
  • You can reach us till 18:00

Specifications

Contains diameters (Ø mm)
1-10 mm x 0‚5 mm
Type
11.441
Norm
DIN 338
Shank type
Cilindrical shank with 3 flats
Tool material
HSS
Surface
TiN
Point type
Split point
Point angle
118°
Spiral type
Phantom
Cutting direction
Right
Coolant feed
No
Tolerance d1 (Tol. d1)
h8
Intrastat (HS) code
82075010
EAN code
8716563783794